HYPERION SERIES
Fresnel
100W - 200W - 300W - 700W
Fresnel spotlights are equipped with a Fresnel lens, recognizable by its distinctive surface of concentric “steps” that allows for a wide and even diffusion of the light beam, creating a very soft transition between the lit area and the shadow. This type of spotlight is used to achieve directional, diffused, and uniform lighting with particularly soft, “blurred” edges.
PC
100W - 200W - 300W - 700W
PC spotlights are equipped with a Plano-Convex lens, recognizable by a flat surface on one side and a smooth convex surface on the other. This type of spotlight is used to achieve a focused, accentuated, and uniform lighting with edges that are always “soft” but more defined compared to the Fresnel version.
The housing is IP20 rating, made by rugged, highly resistant extruded aluminum, free of defects such as burrs, pits and malformations, in combination with lightweight fiber glass enforced hammer proof techno-polymer parts.
The housing doesn’t present any sharp edge and be made with a durable yet lightweight and rustproof construction with excellent mechanical strength for longer life also in presence of high humidity.
Finish is shockproof with anti-scratch epoxy raisin powder coating non-reflective black finish with electrostatic application.
The fixture has a rugged rustproof aluminum yoke, reversible and adjustable in height, with fast balancing technology, mounted into extruded aluminum sliding rail for any positioning of the yoke.
The fixture has a display equipped with a 4 buttons for local control.
The fixture utilizes an advanced thermal management system to maintain LED life to an average of 70% intensity after 54,000 hours of use.
The thermal management system is based on the combination of two cooling systems:
– a passive natural heat convection and
– a super silent active cooling system, also controllable via lighting desk
The passive natural heat convection is guaranteed by excellent LED cooling due to very large and effective double labyrinth dissipation, which at the same time avoid any light spillage over the entire top and the back part of the fixture.
The active cooling system is guaranteed by a forced dissipation of heat using a fan, allowing to intervene on the speed and therefore on the noise of the fans.
The thermal management system includes multiple temperature sensors to avoid an early LED deterioration. In addition a fan speed software allows to override DMX fan speed setting or the current to the LED array in order to prevent heat damages of the fixture that brings lifespan at risk.
The focusing is made by very accurate soft fine-tuning endless screw zoom mechanism placed inside the housing in order to guarantee that the size and balance of the fixture remain stable in any position, even with barndoors and filter frames in front.
The projection has a very precise variable beam angle fine adjustment without jerkins.
The optical system guarantees a powerful uniform light output without pixilation thanks to a high-quality borosilicate glass lense.
The lense is mounted onto extended holders to allow the best ventilation.
Power supply:
The fixture has the PSU driver and dimmer electronic integrated on board.
The fixture is equipped with an internal auto sensing power supply with an input range from 100V to 240V – 50/60 Hz protect by on board fuse
The efficiency should be PF>0.94/230VAC PF>0.98/115VAC at full load
Power connector:
– lockable Neutrik® PowerCON True1 TOP main input connector
– lockable Neutrik® PowerCON True1 TOP main through connector
The fixture supports power in and thru operation up to 16A
Control (DMX signal):
– international standard with XLR 5-pole in/out connectors
The fixtures can be linked together with standard DMX cable
- TW version: from 2,700K to 6,500K
- RGBW version: from 2,700K to 8,000K
- WW version: 3,000K
- CW version: 5,600K
Movements
Light is also movement. For this reason, we offer a wide range of custom solutions for DMX motorization and pole-controlled movements.
Our movement systems are capable of handling any theatrical and television lighting fixture from our production as well as from other major brands, including fog machines and video projectors.
The yokes are designed for those who want to maintain the photometric performance of classic products while increasing their flexibility of use, greatly saving time in aiming and repositioning.
For more information, visit the Movements section.
